The Reflow-Kit V3 Basic contains everything you need for the construction of a prototype SMD module.
The kit contains a SMD-Cube Construction Kit, which is ideal for immediate reflow testing.
The Reflow-Kit V3 Basic contains the following components:
- Reflow-Controller V3 PRO
- temperature sensor
- power cable
- USB cable
- 1 oven
- printed circuit board with embedded LXMS31ACNA-009 Murata UHF RFID-Chip
- suitable stencil
- 9-volt battery
- components
- 100 g soldering paste
- 1 squeegee
- 1 spatula
- 1 tweezers
- 1 roll of adhesive tape
- 1 PCB Holder Set - 1.6mm thick
- 1 PCB Holder Set - 1.0mm thick
SMD-soldering with the Reflow-Kit stands out from other methods through offering quick and high-quality soldering results.
Through applying the soldering paste with the aid of the laser-cut stencil (free of charge with your PCB-POOL® Prototype order) you will achieve precise metering and positioning of the soldering paste.
To adjust the stencil you may use the circuit board holder sets in sizes 1,0mm and 1,6 mm.
The Reflow Controller V3 PRO controls the oven according to the pre-set temperature curve.
And you are able to monitor the soldering process on the display: temperature, corresponding soldering phase and any error messages are displayed.
The controller enables you to make necessary parameter changes directly via the control panel. You can also create and save further temperature profiles for various solder pastes and components.
Technical details of the controller:
Temperature sensor with cable and plug (to be found in the oven together with the printed circuit board)
Fuse: 8A-T
Maximum load: 1,500 W (connected oven)
Operating voltage: 230 V / 50 Hz AC
Only for use in dry areas
Technical data for oven:
Product name: Severin TO 2045
Capacity: 20 l
Grid size: 28 x 28 cm
External dimensions: W 43 cm, H 28 cm, D 38 cm
Connection: 230 V AC
Set-up:
- Temperature controller (infinitely variable)
- 4-step switch
- Timer (max. 60 min.)
- Reflector plate
The device meets the EC Directives 89/336/EEC and 73/23/EEC.
Please follow the safety and operating instructions, which you will find on the right under DOWNLOAD
- similar images –
The kit contains a SMD-Cube Construction Kit, which is ideal for immediate reflow testing.
The Reflow-Kit V3 Basic contains the following components:
- Reflow-Controller V3 PRO
- temperature sensor
- power cable
- USB cable
- 1 oven
- printed circuit board with embedded LXMS31ACNA-009 Murata UHF RFID-Chip
- suitable stencil
- 9-volt battery
- components
- 100 g soldering paste
- 1 squeegee
- 1 spatula
- 1 tweezers
- 1 roll of adhesive tape
- 1 PCB Holder Set - 1.6mm thick
- 1 PCB Holder Set - 1.0mm thick
SMD-soldering with the Reflow-Kit stands out from other methods through offering quick and high-quality soldering results.
Through applying the soldering paste with the aid of the laser-cut stencil (free of charge with your PCB-POOL® Prototype order) you will achieve precise metering and positioning of the soldering paste.
To adjust the stencil you may use the circuit board holder sets in sizes 1,0mm and 1,6 mm.
The Reflow Controller V3 PRO controls the oven according to the pre-set temperature curve.
And you are able to monitor the soldering process on the display: temperature, corresponding soldering phase and any error messages are displayed.
The controller enables you to make necessary parameter changes directly via the control panel. You can also create and save further temperature profiles for various solder pastes and components.
Technical details of the controller:
Temperature sensor with cable and plug (to be found in the oven together with the printed circuit board)
Fuse: 8A-T
Maximum load: 1,500 W (connected oven)
Operating voltage: 230 V / 50 Hz AC
Only for use in dry areas
Technical data for oven:
Product name: Severin TO 2045
Capacity: 20 l
Grid size: 28 x 28 cm
External dimensions: W 43 cm, H 28 cm, D 38 cm
Connection: 230 V AC
Set-up:
- Temperature controller (infinitely variable)
- 4-step switch
- Timer (max. 60 min.)
- Reflector plate
The device meets the EC Directives 89/336/EEC and 73/23/EEC.
Please follow the safety and operating instructions, which you will find on the right under DOWNLOAD
- similar images –
Commande
Downloads
- Déclaration de conformité Controller
- Mode d'emploi Reflow-Kit V3 Basic
- Manuel d'instruction
- Reflow Controller V3 Bedienungsanleitung
- Reflow Controller V3 Sécurité
- Reflow Controller V3 Manual
- Reflow Controller V3 Sécurité
- Controller V3 Firmware Upgrade_V2.1.0
- Sécurité Reflow Ofen
- Consignes de sécurité Reflow four
- Anleitung SMD Bausatz Würfel
- Manual SMD dice assembly kit
- Témoignages
- BGA à souder avec le four à pizza
- Fiche de données de sécurité pâte à souder
- Fiche de données de sécurité pour la pâte à braser
- Fiche technique Lotpaste
- Fiche technique soldering paste