Castellation pads at edge of the PCB?
Is it possible to create castellation pads at the edge of the PCB using pool?
How do I create them in Eagle for your process?
/Björn
Björn
Re: Castellation pads at edge of the PCB?
Hi Bjorn,
When you use the term "Castellation Pads" you require Plated Drills on the Pcb edge.
If this is the case then the answer is "yes" we can produce these in Pcb-Pool.
The minimum drill size we can produce this way is 2.0mm.
Please see the Specification page and the section on Routing Tolerances on our website for more details.
Best Regards
Your Pcb-Pool Team
Beta LAYOUT Ltd Service Team
Re: Castellation pads at edge of the PCB?
Hello!
Since the post is 2.5 years old and considering that a lot of boards seems to have 1mm castellation holes, I just want to confirm that the minimum drill size for this is still 2mm. Also, does the minimum annular ring of 0.2mm apply for these wholes.
Regards
/John-Olof
John-Olof Nilsson
Re: Castellation pads at edge of the PCB?
Hi John-Olof
We can confirm that the parameters are still the same size. You will find the current specification on our Site: www.pcb-specification.com
Best regards
Your PCB-POOL Service Team
PCB-POOL (R) Service Team
Re: Castellation pads at edge of the PCB?
is this still valid or are you in the meatime able to produce also smaller castellation pads? I would require 1mm diameter drill size...
Daniel Scholz