Double USB connector, type A, socket for your front panel

By fixing the USB socket on your front panel with screws, you can ensure stable, safe assembly.

2 countersunk head screws, M 2.5 x 8 mm, are supplied for assembly.

You can connect the socket directly to your printed circuit board via push-through installation; the connections are located vertically at the back. Push-in or solder cable connections are also possible.

Product details:

USB sockets provide an ideal solution for data transmission, even under harsh environmental conditions that require a sturdy, reliable connector. In connected or disconnected status, these USB sockets are submersible in water, rather than just being water-repellent. They are designed for industrial and military communication, together with mobile and other demanding connector uses.

These USB connectors feature the following functions:

Protection index IP 67 in connected or disconnected status
Nickel plated pressure cast connector housings
Black housing, UL94V-0
Contact enhancement: Gold

Nominal current: 1.5 A
Nominal voltage: 100 V DC @ -25°C → +85°C
Dielectric strength: 500 V AC RMS, 60 Hz for 1 minute
Operating temperature range: -40°C → +105°C

Technical data:


Gender Female
Assembly type Push-through installation
Type of connection Soldering
Housing orientation Straight
Number of ports 2
Nominal current 1.5A
Series MUSB
Contact material Copper alloy
Min. operating temperature -40°C
Max. operating temperature 105°C


Order
Item number: RK-10873
Availability: immediately
Gross: 13.50 GBP
Net: 10.98 GBP

plus shipping costs

Order quantity: