The Reflow-Kit V3 Basic contains everything you need for the construction of a prototype SMD module.
The kit contains a SMD-Cube Construction Kit, which is ideal for immediate reflow testing.
The Reflow-Kit V3 Basic contains the following components:
- Reflow-Controller V3 PRO
- temperature sensor
- power cable
- USB cable
- 1 oven
- suitable stencil
- 9-volt battery
- components
- 100 g soldering paste
- 1 squeegee
- 1 spatula
- 1 tweezers
- 1 roll of adhesive tape
- 1 PCB Holder Set - 1.6mm thick
- 1 PCB Holder Set - 1.0mm thick
SMD-soldering with the Reflow-Kit stands out from other methods through offering quick and high-quality soldering results.
Through applying the soldering paste with the aid of the laser-cut stencil (free of charge with your PCB-POOL® Prototype order) you will achieve precise metering and positioning of the soldering paste.
To adjust the stencil you may use the circuit board holder sets in sizes 1,0mm and 1,6 mm.
The Reflow Controller V3 PRO controls the oven according to the pre-set temperature curve.
And you are able to monitor the soldering process on the display: temperature, corresponding soldering phase and any error messages are displayed.
The controller enables you to make necessary parameter changes directly via the control panel. You can also create and save further temperature profiles for various solder pastes and components.
Technical details of the controller:
Temperature sensor with cable and plug (to be found in the oven together with the printed circuit board)
Fuse: 8A-T
Maximum load: 1,500 W (connected oven)
Operating voltage: 230 V / 50 Hz AC
Only for use in dry areas
Technical data for oven:
Product name: Severin TO 2045
Capacity: 20 l
Grid size: 28 x 28 cm
External dimensions: W 43 cm, H 28 cm, D 38 cm
Connection: 230 V AC
Set-up:
- Temperature controller (infinitely variable)
- 4-step switch
- Timer (max. 60 min.)
- Reflector plate
The device meets the EC Directives 89/336/EEC and 73/23/EEC.
Please follow the safety and operating instructions, which you will find on the right under DOWNLOAD
- similar images –
The kit contains a SMD-Cube Construction Kit, which is ideal for immediate reflow testing.
The Reflow-Kit V3 Basic contains the following components:
- Reflow-Controller V3 PRO
- temperature sensor
- power cable
- USB cable
- 1 oven
- suitable stencil
- 9-volt battery
- components
- 100 g soldering paste
- 1 squeegee
- 1 spatula
- 1 tweezers
- 1 roll of adhesive tape
- 1 PCB Holder Set - 1.6mm thick
- 1 PCB Holder Set - 1.0mm thick
SMD-soldering with the Reflow-Kit stands out from other methods through offering quick and high-quality soldering results.
Through applying the soldering paste with the aid of the laser-cut stencil (free of charge with your PCB-POOL® Prototype order) you will achieve precise metering and positioning of the soldering paste.
To adjust the stencil you may use the circuit board holder sets in sizes 1,0mm and 1,6 mm.
The Reflow Controller V3 PRO controls the oven according to the pre-set temperature curve.
And you are able to monitor the soldering process on the display: temperature, corresponding soldering phase and any error messages are displayed.
The controller enables you to make necessary parameter changes directly via the control panel. You can also create and save further temperature profiles for various solder pastes and components.
Technical details of the controller:
Temperature sensor with cable and plug (to be found in the oven together with the printed circuit board)
Fuse: 8A-T
Maximum load: 1,500 W (connected oven)
Operating voltage: 230 V / 50 Hz AC
Only for use in dry areas
Technical data for oven:
Product name: Severin TO 2045
Capacity: 20 l
Grid size: 28 x 28 cm
External dimensions: W 43 cm, H 28 cm, D 38 cm
Connection: 230 V AC
Set-up:
- Temperature controller (infinitely variable)
- 4-step switch
- Timer (max. 60 min.)
- Reflector plate
The device meets the EC Directives 89/336/EEC and 73/23/EEC.
Please follow the safety and operating instructions, which you will find on the right under DOWNLOAD
- similar images –
Order
Downloads
- Declaration of conformity Controller
- Operation manual Reflow Kit V3 Basic
- Instruction Manuals
- Reflow Controller V3 Bedienungsanleitung
- Reflow Controller V3 Safety Instructions
- Reflow Controller V3 Manual
- Reflow Controller V3 Safety Instructions
- Controller V3 Firmware Upgrade_V2.1.0
- Safety Instructions Reflow Ofen
- Safety Instructions Reflow Oven
- Anleitung SMD Bausatz Würfel
- Manual SMD dice assembly kit
- User report
- BGA soldering with the pizza oven
- Safety Instructions solder paste
- safety datasheet solder paste
- Technical Data sheet soldering paste
- technical datasheet soldering paste
