The Reflow Kit V3 PRO is a compilation of the Reflow oven, Reflow controller V3 PRO and Magnetic workbench.

Everything you need for prototype production of SMD modules.

The kit contains a SMD-Cube Construction Kit, with which the soldering results can be tested on the spot.

The Beta Reflow Kit:
We do not claim that it offers perfect industrial quality for soldering. However, it is a very affordable tool for solving some of the major problems when manufacturing SMD modules. Furthermore it stands out from other methods as it also offers quick and very high-quality soldering results.

Through applying the soldering paste with the aid of the laser-cut stencil (free of charge with your PCB-POOL® Prototype order) you will achieve precise metering and positioning of the paste.

The included magnetic workbench enables you to apply solder paste to several printed circuit boards in succession without having to realign the SMD stencil.

The Reflow Controller V3 PRO controls the oven according to the pre-set temperature profile. You can follow the soldering process directly on the display: the temperature, corresponding soldering phase and any error messages are displayed.

The controller enables you to make necessary parameter changes directly via the control panel. You can also create and save further temperature profiles for various solder pastes and components.

Technical data for the controller:

Temperature sensor with cable and connector
(is placed in the oven together with the printed circuit board)
Fuse: 8A-T
Maximum load: 1,500 W (connected oven)
Operating voltage: 230 V / 50 Hz AC
Only for use in dry areas

Technical data for oven:

Product name: Severin TO 2045
Capacity: 20 l
Grid size: 28 x 28 cm
External dimensions: W 43 cm, H 28 cm, D 38 cm
Connection: 220 V

Warranty: 2-year manufacturer warranty

- Temperature controller (infinitely variable)
- 4-step switch
- Timer (max. 60 min.)
- Reflector plate

The device meets the EC Directives 89/336/EEC and 73/23/EEC.

Reflow Kit V3 PRO comprises of:

- Reflow Controller V3 PRO
- Temperature sensor
- Power cable
- USB cable
- 1 oven
- Printed circuit board with embedded LXMS31ACNA-009 Murata UHF RFID chip
- Suitable stencil
- 9-volt battery
- Components
- 100 g solder paste
- 1 squeegee
- 1 spatula
- 1 tweezer
- Template holder made from VA - magnetic
- 4 permanent magnets
- 1 magnetic foil plate to cut to size
- 1 distance plate 0.6 mm
- Similar to illustrations -